Skip to Main Content

Packaged Chiller

    • Consumer Beverage
    • Brewing
    • Dairy Farm
    • Food
    • HVAC
    • Refrigeration & Chilling
    • Cooling & Chilling
    • Fermentation
    • Heating
  1. Features

    Standard Features

    • Stainless steel brazed plate evaporator with 1/2" insulation; secured in a blanket
    • Scroll or semi-hermetic compressor with crankcase heater
    • Suction accumulator
    • Water flow switch
    • Hot gas by-pass capacity control
    • Liquid line drier, sight glass, solenoid, and TEV
    • On/off switch for control circuit operation
    • Manual compressor lead-lag switch on dual circuit units
    • 24-volt control transformer
    • Return fluid sensing thermostat
    • Painted galvanized sheet metal cabinet
    • Full refrigerant charge from the factory
    • High-pressure refrigerant control
    • Low-pressure refrigerant control with time delay
    • LED 24-volt thermometers on water inlet/outlet
    • Compressor motor contactor
    • Compressor and control circuit fusing
    • Compressor and hot gas valve time delays
    • "Hard start kit" (single-phase units only)
    • Refrigerant discharge/liquid access valves
    • Fused stainless steel recirculation pump for tank operation with ball valve and cleanable strainer
    • Stainless steel storage tank with 1/2" insulation
    • 1/2" insulation on all water and refrigerant lines
    • Tank pressure relief valve, vent, and drain connections

    Optional Features

    • Low water flow indicator with dry contacts
    • High-temperature indicator with dry contacts
    • Compressor run indicator
    • Power on indicator
    • Fault indicator with dry contacts
    • Casters (factory mounted)
    • Water temperature freeze thermostat
    • Variable fan speed control (+20°F)
    • Flooded condenser with receiver/head pressure control (–20°F)
    • Factory-installed heat tape freeze protection, thermostatically controlled
    • Special piping for de-ionized and reverse osmosis
    • “Gold” finned condenser coil (coastal protection)
    • Refrigerant suction/discharge gauge set
    • Fused stainless steel system process pump
    • Fused stainless steel system recirculation pump
    • Stainless steel storage tank with 1⁄2" insulation
    • Water-cooled coaxial steel/copper tube condenser
    • Fan cycle control (+40°F): 90S, 120S, and 240D only
    • Semi-hermetic compressor
    • Shell-and-tube chiller barrel
    • Fused disconnect
    • Water flow meter
    • Phase monitor
  2. Specifications

    Work with our innovative engineers to create a piece of equipment perfect for you and your facility. At Paul Mueller Company, we work to meet all your needs, and with our various shapes, sizes, and specifications, we are confident that we will be able to make a high-quality product that you will love.