Packaged Chillers

Packaged Chillers

Chilled Water For Industrial Cooling Applications

Mueller packaged chillers provide a superior source of chilled water for most industrial cooling applications. Our packaged chillers range in capacities from 1-90 tons. 


Typical Applications

Commercial and Industrial Process Cooling

  • Commercial Air Conditioning
  • Oil Cooling
  • Injection Molding Cooling
  • Plating Process Cooling
  • Welding Machine Cooling
  • Computer Room Air Conditioning
  • Laser Cooling
  • Dry Cleaning Machine Cooling
  • Jacket Cooling
  • Water Cooled Condenser Cooling
  • X-Ray Developer Cooling
  • Photo Process Cooling

Medical Process Cooling

  • M.R.I. Magnet Cooling
  • Operating Room Air Conditioning
  • P.E.T. Scan Cooling
  • C.A.T. Scan Cooling
  • Lab Testing
  • Hypothermia Blankets

Standard Features

  • Stainless steel brazed plate evaporator with 1/2" insulation; secured in a blanket.
  • Scroll or semi-hermetic compressor with crankcase heater.
  • Suction accumulator.
  • Water flow switch.
  • Hot gas by-pass capacity control.
  • Liquid line drier, sightglass, solenoid, and TEV.
  • On/off switch for control circuit operation.
  • Manual compressor lead lag switch on dual circuit units.
  • 24-volt control transformer.
  • Return fluid sensing thermostat.
  • High-pressure refrigerant control.
  • Low-pressure refrigerant control with time delay.
  • LED 24-volt thermometers on water inlet/outlet.
  • Compressor motor contactor.
  • Compressor and control circuit fusing.
  • Compressor ant hot gas valve time delays.
  • "Hard start kit" (single-phase units only).
  • Refrigerant discharge/liquid access valves.
  • Fused stainless steel recirculation pump for tank operation with ball valve and cleanable strainer.
  • Stainless steel storage tank with 1/2" insulation.
  • 1/2" insulation on all water and refrigerant lines.
  • Tank pressure relief valve, vent, and drain connections.
  • Painted galvanized sheet metal cabinet.
  • Full refrigerant charge from factory.